Generation 1 StaYmo’s “Deck Series” is a trolling motor shock absorber/stabilizer. (No drilling holes required). As wave impact your boat, StaYmo is supporting your trolling motor shaft and absorbing the energy to reduce or eliminate trolling motor shaft bounce and side wobble that can damage your your trolling motor and boat. Wave pounding energy is absorbed by a combination of a stainless steel spring plunger and flexible nonslip rubber deck cup. Deck cup functions on all flat surfaces such as smooth, non skid, carpeted and foam surfaces (Sea Dek). Patent Pending
StaYmo Features
~ Accomodates Minn Kota (1.31) as well as other trolling motors with similar shaft diameters.
~ No drilling those awful holes in your boat deck.
~ Standard color is white and black. See listing photo for additional color options to match your boat.
~ Best looking trolling motor stabilizer on the market.
~ Easy on-easy off shaft clamp with hook and loop cinch strap and nonslip rubber grip saddles. Allows full use of shaft adjustment for times when it’s windy and rough water.
- Hexagon shape body for strength and anti-roll.
Please Note: Rokit Rider’s and DeKmo assist handle in photo not included.
MODEL SELECTION
To determine which StaYmo model to order, simply measure from boat deck to bottom of trolling motor shaft in the area you plan to attach your StaYmo. We like to position our StaYmo near the power head or near the motor head but anywhere on the shaft will work, See photo for “how to measure”. Four height ranges from 5 inches minimum to 13 1/2 inches maximum to accommodate varying distance from deck to bottom of trolling motor shaft.
For Garmin Krakin and MinnKota Quest trolling motors see our StaYmo “KD” and “QD” models.
StaYmo Installation Instructions
1. Select area on trolling motor shaft to position StaYmo. Deck area must be flat.
2. Remove nut and bolt.
3. Extend StaYmo shaft to compress spring. A good starting point is to compress the shaft about 1/4 inch and then add more compression if needed after testing.
4. Replace bolt and tighten nut securely.
5. It’s that easy to install. See installation video. Go fishing
Note: Rubber deck cup functions as a stabilizer and not intended to suction. Works on all type of flat surfaces.
To stabilize and protect your control power cord we have a “Cord Clip”. See listing in our store.
For boats with bow rail or pop up cleat we offer a StaYmo models. See listing in our store.
If you want help launching and decking your trolling motor check out the DeKmo listing in our store.
At the end of the boating day and long term storage we recommend removing your StaYmo for easy boat cleaning and give it a rinse of fresh water and apply sun protector before stowing away with your tackle and tools. Easy on…….easy off. The way we like it.
StaYmo is manufactured primarily of recyclable PETG which is waterproof, shock resistant, flexible, UV resistant and tolerates temperatures up to 185 degrees Fahrenheit.
100% satisfaction guaranteed.
Proudly designed and manufactured in the USA. We also provide service and parts.
Complete salt water and fresh water tested. We use the products to improve the boating experience.
Free shipping
Questions or need help just text us at : bitsmfgllc.com@gmail.com
StaYmo is a registered trademark
Patents Pending.
All rights reserved by BITS Manufacturing, LLC . BITSMFG.com
